logo
Shandong Lift Machinery Co.,Ltd
Produkte
Produkte
Zu Hause > Produkte > scissor Autoaufzug > 3.5 Ton Cold Climate Hydraulic Scissor Car Lift -30 Degree Oil Ready for Canadian Winter Garage Service

3.5 Ton Cold Climate Hydraulic Scissor Car Lift -30 Degree Oil Ready for Canadian Winter Garage Service

Einzelheiten zum Produkt

Herkunftsort: Shandong, China

Markenname: Shandong Shiqi Machinery

Zertifizierung: CE

Modellnummer: SJG3.5-3.2CC

Zahlungs- und Versandbedingungen

Min Bestellmenge: 1 Satz

Preis: USD 4,600 - 5,300 / Set

Verpackung Informationen: Sperrholzgehäuse und Stahlrahmen, seetüchtige Exportverpackung

Lieferzeit: 25-35 Tage nach der Einzahlung

Zahlungsbedingungen: T/T, L/C auf Sicht

Versorgungsmaterial-Fähigkeit: 60 Sätze pro Monat

Beste Preis erhalten
Hervorheben:

Cold Climate Scissor Car Lift

,

3.5 Ton Winter Car Lift

,

Low Temperature Hydraulic Car Lift

Nennlast:
3.500 kg
Hubhöhe:
3.200 mm
Plattformgröße:
5.200 x 2.600 mm
Pit Depth:
750 Millimeter
Stromversorgung:
220V / 60Hz / 3 Phasen
Hydrauliköl:
Synthetisch ISO 32, -30 C
Betriebstemperatur:
-30 °C bis +45 °C
Zylinder:
4 x 160 mm Bohrung
Hubgeschwindigkeit:
3 m/min
Nettogewicht:
2.100 kg
Garantie:
24 Monate
Nennlast:
3.500 kg
Hubhöhe:
3.200 mm
Plattformgröße:
5.200 x 2.600 mm
Pit Depth:
750 Millimeter
Stromversorgung:
220V / 60Hz / 3 Phasen
Hydrauliköl:
Synthetisch ISO 32, -30 C
Betriebstemperatur:
-30 °C bis +45 °C
Zylinder:
4 x 160 mm Bohrung
Hubgeschwindigkeit:
3 m/min
Nettogewicht:
2.100 kg
Garantie:
24 Monate
3.5 Ton Cold Climate Hydraulic Scissor Car Lift -30 Degree Oil Ready for Canadian Winter Garage Service
At minus 25 degrees in Alberta or Quebec, ordinary 46# hydraulic oil turns to jelly and the pump screams for ten seconds before anything moves. This cold climate scissor car lift is built the other way around: it ships with synthetic low pour point oil rated to minus 30 degrees, a 60 degree C thermostat controlled cabinet heater and cold flexible hydraulic hoses that stay supple in a frozen garage. The 3.5 ton platform lifts to 3,200 mm and uses four 160 mm cylinders fed